System 1 Spray Marking System
Spray Marking System
System 1 Spray Marking System
Description....
Select 1 System / Model V 45
Small spray system with miniature material pressure tanks, to apply about 3,500 dots (dots 5 mm in diameter)
Simple operation, low maintenance
For dots of from 3 to 30 mm in diameter
A solenoid valve is used to trigger the spray gun.
WALTHER PILOT can also deliver the controls, upon request
We would be happy to provide planning and assembly services, right through to integrating the system into your assembly line.
Equipment
- Marking spray gun, Model 20-360, with pull rod for manual activation (e.g. for spray trials)
- Body: nickel-plated brass; nozzle and needle: stainless steel; nozzle sizes: 0.3, 0.5, 0.8, 1.0, 1.2, 1.5 mm in diameter
- Miniature material pressure tank, 45 ml, stainless steel, max. 3 bar
- Solenoid valve, 3-port, 2-position, 24 V DC; other voltages available
- Compressed air manifold with pressure gauges and safety valve
- Combination of all compressed air control functions for simpler marking systems (control and spraying air for the spray gun, tank pressurisation air)
- Hose kit (2 metres), incl. fittings for both the air and material hoses
Options
- The miniature material pressure tank is attached directly to the spray gun, without a connector hose.
- Holders for marking guns
- Spray booths ‘Air on demand’. Overspray exhaust systems are mandatory even if applying only tiny amounts of paint. We have an affordable solution.
- Color sensors and measurement transducers for function monitoring
- Integration of the system into your assembly line
