Products
Self Aligning Roll Cooling Nozzle. The roll cooling nozzle is a self-aligning nozzle assembly, this ensures the spray performance remains consistent after replacement or maintenance. In just a matter of seconds, nozzle tips can be changed. Simply loosen the retaining cap, replace the nozzle tip and replace the cap to secure.
C Type Series Spray Nozzle. The C Type Series nozzle produces a evenly distributed deflected flat fan spray pattern and is designed only for the process of continuous casting within the Steel Industry.
LF Series Spray Nozzle. Full Cone Spray Pattern Nozzle For Steel Applications. Commonly used for billet casting or edge spraying of slabs/blooms. This full cone nozzle produces an even distribution using a secure vane design. The hexagon body allows for easy installation and removal.
RE Series Spray Nozzle, Spray Nozzle With Uniform Coverage And Droplets. The RE Series nozzle produces a rectangular spray foot print with uniform spray distribution. The nozzle orifice profile ensures a precise and even spray with the additional benefit of having removable internals, thus allowing ease for maintenance.
Stainless Steel Airmist Cooling Nozzles. Air Mist Nozzle With Uniform Coverage And Droplets. This nozzle design is available in both block and round version, both designs produce a spray pattern with highly uniform droplets. This makes the cooling process more controllable, with reduced tendency for water puddling and localised uneven cooling or thermally induced roller deflection. The flat spray pattern is thick, even with angles from 60 degree to 120 degree offering good coverage with few nozzles.
Humidity Control During Tobacco and Cigarette Production. Maintaining the correct relative humidity during tobacco and cigarette production is crucial for retaining the quality of the product. Shrinkage, flaking, brittleness, splitting and weight loss all result if the environment becomes too dry. If the correct level of humidity is achieved, these problems can be prevented ensuring that the tobacco leaves and associated production equipment are always at their highest level of efficiency.
Severe dust and production issues are frequently present during production in the textile industry. Static build-up, dust, breakages can be common place if the atmosphere becomes too dry. Heat generated by machinery contributes to the problems, which need to be combated by putting moisture back into the atmosphere.
Printing & Humidity Contol. Numerous problems occur within the printing, paper and cardboard manufacturing industries, which can be associated with low, or incorrect humidity levels.
Cold Storage Humidity Systems. Cold air is unable to hold as much moisture as warm air, as ambient air enters a cold store the air temperature reduces and the moisture falls out condensing onto cold surfaces and the refrigeration coils.
Automotive. To ensure as little paint as possible is wasted when the paint is being transferred from the spray gun to the vehicle bodywork a humidity level of around 70%rH is needed. This will help avoid the problem of paint evaporation and in turn reduce paint costs.
Airopure Odour Control Agent. Designed to eliminate odours including hydrogen sulphide, ammonia, organic sulphur and nitrogen compounds. Unlike alternative odour control additives Airopure’s sophisticated science means it combines physically with the odour molecules and destroys them completely.
Wall Or Floor Mounted Odour Control Atomiser Heads. The wall mounted unit is secured to walls using either rawl bolts or clamps, the static wall mounted atomiser gives a linear spray of between 20 and 25 metres with a 10 degree diameter. The floor mounted unit stands 2.5 metres high and is secured to either a concrete base or similar fixed level surface using rawl bolts or clamps, the floor mounted atomiser gives a linear spray of between 20 – 25 metres with a 10 degree diameter
19 Ellerbeck Court
Stokesley Business Park
Stokesley
Middlesbrough
North Yorkshire
TS9 5PT
